Sparc Enterprise Mx000: WARNING: fcode_timer: Timeout waiting for interpreter - Interpreter did not pick up request

Вот такая ошибка на операциях move/add/delete - board.

addboard -v -d0 -c configure 01-03
XSB#01-3 will be configured into DomainID 0. Continue?[y|n] :y
Initial diagnosis started. [1800sec]
  0..... 30..... 60..... 90.....120.....150.....180.....end
Initial diagnosis has completed.
Start configuring XSB to domain.
assign SB4
assign SB4 done
poweron SB4
poweron SB4 done
test SB4
test SB4 done
connect SB4
connect SB4: Firmware probe failed
XSB#01-3 could not be configured into DomainID 0 due to operating system error.

В Солярис видим /var/adm/messages:
Jun 24 15:33:37 fcodem: [ID 696114 kern.warning] WARNING: fcode_timer: Timeout waiting for interpreter - Interpreter did not pick up request
Jun 24 15:33:37 opl_cfg: [ID 695635 kern.warning] WARNING: IKP: Unable to probe PCI leaf (4-4-0)
Jun 24 15:33:37 drmach: [ID 702911 kern.warning] WARNING: Firmware probe failed
Jun 24 15:33:37 dcs: [ID 473489 daemon.error] <19325> config_change_state: Hardware specific failure: connect SB4: Firmware probe failed

В доке читаем на описание ошибки - обращаться в сервис.
Делаем сами:
#svcadm enable sun4u/efdaemon

Теперь все работает